Combat-net radio
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
In telecommunication, a combat-net radio (CNR) is a radio operating in a network that (a) provides a half-duplex circuit and (b) uses either a single radio frequency or a discrete set of radio frequencies when in a frequency hopping mode.
CNRs are primarily used for push-to-talk-operated radio nets for command and control of combat, combat support, and combat service support operations among military ground, sea, and air forces.
In the United States, two military standards govern the use of combat net radios and the host applications that communicate over the network: MIL-STD-188-220 and MIL-STD-2045-47001. In addition to IETF RFCs governing UDP, TCP, and IPv4/IPv6, all seven layers of the OSI communications architecture are addressed. MIL-STD-2045-47001 covers layer 7 (application), while MIL-STD-188-220 covers layers 1 through 3 (physical, data link, and network).
Examples[edit]
- AN/PRC-152 by Harris Corporation
- AN/PRC-117
- AN/PRC-77
- SINCGARS
- AN/PRC-148 MBITR
- PR4G by Thales Communications
- PRC-525 by EID
- Clansman
- Leopard1 by Sat-Com Pty Ltd
See also[edit]
References[edit]
This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22. (in support of MIL-STD-188).