Wink pulsing

Winking is a telephony signaling technique used both in connection with DC signaling on a trunk, and with indicator lamps on a key telephone.

In telephone switching systems, wink pulsing is recurring pulsing in which the off condition is relatively short compared to the on condition. In wink start trunks, the exchange at the originating end sends an off-hook to alert to a call. The terminating end indicates readiness to receive the dialed telephone number by sending an off-hook of approximately half a second duration, or "wink". Upon receiving this go ahead signal, the originating end uses multi-frequency or other address signalling to send the phone number.

On 1A2 key systems or similar key-operated telephone instruments, the hold position, i.e., the hold condition, of a line is often indicated by winking the associated lamp at 120 impulses per minute. During 6% of the pulse period the lamp is off and 94% of the period the lamp is on, i.e., 30 ms (milliseconds) off and 470 ms on.

References

•  This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22. (in support of MIL-STD-188).